mp_select_mini_v2
# links
# settings
- print area 120x120x120mm
- nozzle 0.4mm
- filament 1.75mm
- print speed 50 mm/sec
- travel speed 150 mm/sec
# experience
- PLA temp 190. (less than 190 causes the extruder to slip/fail)
- bed >40C to stick
## ABS
- Nozzle temp 220
- Bed temp 65
- Watch the outline lap closely. the shape of the plastic line says whether the height is correct in that part of the print bed
mp_select_mini_v2.txt · Last modified: 2017/05/26 18:43 by donpdonp
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
