reprap-morgan
http://reprap.org/wiki/RepRap_Morgan
hardware
Hawthorne True Value
- M8 Nut $0.38
- M8 Washer $0.18
- M8 threaded rod up to 100mm (too short)
- brass tubing up to 380mm (too short)
Winks
- M8 threaded rod 1m long $10
- copper tubing 5/8“/15.875mm(actual) $7.99 4ft/1219mm
- copper tubing 7/8”/22.225(actual) $12.99 4ft/1219mm
VXB Bearing
- 10 Bearing 608ZZ Shielded 8x22x7 Miniature Ball Bearings $7.37 ($5.74 shipping)
printable parts
print all the items from https://github.com/qharley/Morgan
| filename | specs | Thanks to | |||
| 01-pvc_pipe_support_a.stl | |||||
| 02-pvc_pipe_support_b.stl | |||||
| 03-z_mount_bottom_12mm.stl | |||||
| 03-z_mount_bottom_8mm.stl | |||||
| 04-z_mount_top_12mm.stl | |||||
| 04-z_mount_top_8mm.stl | |||||
| 05-motormount_short.stl | |||||
| 06-motormount_tall.stl | |||||
| 07-drivewheel_rod.stl | |||||
| 08-drivewheel_tube.stl | |||||
| 09-22mm_6805_bearing_adaptor.stl | |||||
| 10-bed_arm_left_12mm.stl | |||||
| 10-bed_arm_left_8mm.stl | |||||
| 11-bed_arm_right_12mm.stl | |||||
| 11-bed_arm_right_8mm.stl | |||||
| 12-bed_z_mount_bracket_12mm.stl | |||||
| 12-bed_z_mount_bracket_8mm.stl | |||||
| 13-bed_rear_mountclips.stl | |||||
| 14-bed_front_mountclips.stl | |||||
| 15-hall_endstop_holder_12mm.stl | |||||
| 15-hall_endstop_holder_8mm.stl | |||||
| 16-leadscrew_shaft_motor_mount.stl | |||||
| 17-Morgan_arm_PSI_a.stl | ABS | sandwich | |||
| 18-Morgan_arm_PSI_b.stl | ABS | sandwich | |||
| 19-Morgan_arm_Theta_a.stl | ABS | sandwich | |||
| 20-Morgan_arm_Theta_b.stl | ABS | sandwich | |||
| 21-Morgan_toolhead.stl | |||||
| 22-Leadscrew-nut_Alpen8mmSDS.stl | |||||
| 23-extruder_bowden_adaptor.stl | |||||
| 24-Morgan_Spool_holder.stl | |||||
| cap_2.stl | |||||
| cloud_fix_stl.bash | |||||
| Eckstruder_Big_Gear_Herringbone.stl | |||||
| Eckstruder_Block_for_Prusa.stl | |||||
| Eckstruder_Idler_Block_for_Prusa.stl | |||||
| Eckstruder_Small_Gear_Herringbone.stl | |||||
| thumb_knob_M4_extruder.stl | |||||
| tighteningCone_2.stl |
reprap-morgan.txt · Last modified: 2016/06/25 11:25 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
