neotiny
**This is an old revision of the document!**
neotiny square Jan 2017
- add gnd to go with each of the 4 data/programming lines
- 2 mounting holes
- move power to opposite side of neopx
- center neopix and power connections between edges
- align all pins to breadboard grid
- add accelerometer?
- add color sensor?
GOOD FUSES
avrdude: safemode: lfuse reads as E2 avrdude: safemode: hfuse reads as DF avrdude: safemode: efuse reads as FF avrdude: safemode: Fuses OK (H:FF, E:DF, L:E2)
Write
/home/donp/code/arm/arduino-1.6.9/hardware/tools/avr/bin/avrdude -C/home/donp/.arduino15/packages/ATTinyCore/hardware/avr/1.1.2/avrdude.conf -v -pattiny85 -carduino -P/dev/ttyACM0 -b19200 -U hfuse:w:0xDF:m
neotiny.1486247899.txt.gz · Last modified: 2024/01/31 04:08 (external edit)