User Tools

Site Tools


neotiny

neotiny square Jan 2017

  • add gnd to go with each of the 4 data/programming lines
  • 2 mounting holes
  • move power to opposite side of neopx
  • center neopix and power connections between edges
  • align all pins to breadboard grid
  • add accelerometer?
  • add color sensor?

GOOD FUSES

avrdude: safemode: lfuse reads as E2
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as FF
avrdude: safemode: Fuses OK (H:FF, E:DF, L:E2)

Write

/home/donp/code/arm/arduino-1.6.9/hardware/tools/avr/bin/avrdude -C/home/donp/.arduino15/packages/ATTinyCore/hardware/avr/1.1.2/avrdude.conf -v -pattiny85 -carduino -P/dev/ttyACM0 -b19200 -U hfuse:w:0xDF:m
neotiny.txt · Last modified: 2017/02/04 14:38 by donpdonp