Differences

This shows you the differences between two versions of the page.

--- mp_select_mini_v2 [2017/05/10 03:22] – donpdonp
+++ mp_select_mini_v2 [2024/01/31 04:08] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-https://www.monoprice.com/product?c_id=107&cp_id=10724&cs_id=1072403&p_id=21711&seq=1&format=2
+# links
+  * https://www.monoprice.com/product?c_id=107&cp_id=10724&cs_id=1072403&p_id=21711&seq=1&format=2
+  * manual https://downloads.monoprice.com/files/manuals/21711_Manual_170328.pdf
+  * http://mpselectmini.com/
+  * https://plus.google.com/communities/116802523766279866092
 # settings
@@ Line 7: / Line 11: @@
   * filament 1.75mm
-  * layer height 0.1mm
   * print speed 50 mm/sec
   * travel speed 150 mm/sec
+# experience
+  * PLA temp 190. (less than 190 causes the extruder to slip/fail)
+  * bed >40C to stick
 ## ABS
   * Nozzle temp 220
   * Bed temp 65
-  * Watch the first layer closely. the shape of the line of plastic on the bed says whether the height is correct
+  * Watch the outline lap closely. the shape of the plastic line says whether the height is correct in that part of the print bed