Differences

This shows you the differences between two versions of the page.

--- reprap-morgan [2013/08/19 22:14] – created donpdonp
+++ reprap-morgan [2024/01/31 04:08] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 http://reprap.org/wiki/RepRap_Morgan
+=== hardware ===
+Hawthorne True Value
+  * M8 Nut $0.38
+  * M8 Washer $0.18
+  * M8 threaded rod up to 100mm (too short)
+  * brass tubing up to 380mm (too short)
+Winks
+  * M8 threaded rod 1m long $10
+  * copper tubing 5/8"/15.875mm(actual) $7.99 4ft/1219mm
+  * copper tubing 7/8"/22.225(actual) $12.99 4ft/1219mm
+VXB Bearing
+  * 10 Bearing 608ZZ Shielded 8x22x7 Miniature Ball Bearings $7.37 ($5.74 shipping)
+=== printable parts ===
 print all the items from https://github.com/qharley/Morgan
-|| filename || Y/N || Thanks to ||
+|| filename || specs || Thanks to ||
 || 01-pvc_pipe_support_a.stl || || ||
 || 02-pvc_pipe_support_b.stl || || ||
@@ Line 26: / Line 45: @@
 || 15-hall_endstop_holder_8mm.stl || || ||
 || 16-leadscrew_shaft_motor_mount.stl || || ||
-|| 17-Morgan_arm_PSI_a.stl || || ||
+|| 17-Morgan_arm_PSI_a.stl || ABS || sandwich ||
-|| 18-Morgan_arm_PSI_b.stl || || ||
+|| 18-Morgan_arm_PSI_b.stl || ABS || sandwich ||
-|| 19-Morgan_arm_Theta_a.stl || || ||
+|| 19-Morgan_arm_Theta_a.stl || ABS || sandwich ||
-|| 20-Morgan_arm_Theta_b.stl || || ||
+|| 20-Morgan_arm_Theta_b.stl || ABS || sandwich ||
 || 21-Morgan_toolhead.stl || || ||
 || 22-Leadscrew-nut_Alpen8mmSDS.stl || || ||