Don Park

User Tools

Site Tools

Trace:
mp_select_mini_v2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
mp_select_mini_v2 [2017/05/10 21:09] – donpdonpmp_select_mini_v2 [2024/01/31 04:08] (current) – external edit 127.0.0.1
Line 1: Line 1:
-https://www.monoprice.com/product?c_id=107&cp_id=10724&cs_id=1072403&p_id=21711&seq=1&format=2+# links 
 +  * https://www.monoprice.com/product?c_id=107&cp_id=10724&cs_id=1072403&p_id=21711&seq=1&format=2 
 +  * manual https://downloads.monoprice.com/files/manuals/21711_Manual_170328.pdf 
 +  * http://mpselectmini.com/ 
 +  * https://plus.google.com/communities/116802523766279866092
  
 # settings # settings
Line 7: Line 11:
   * filament 1.75mm   * filament 1.75mm
  
-  * layer height 0.1mm 
   * print speed 50 mm/sec   * print speed 50 mm/sec
   * travel speed 150 mm/sec   * travel speed 150 mm/sec
 +
 +# experience
 +  * PLA temp 190. (less than 190 causes the extruder to slip/fail)
 +  * bed >40C to stick
  
 ## ABS ## ABS
   * Nozzle temp 220   * Nozzle temp 220
   * Bed temp 65   * Bed temp 65
-  * Watch the first layer closely. the shape of the line of plastic on the bed says whether the height is correct in that part of the print bed+  * Watch the outline lap closely. the shape of the plastic line says whether the height is correct in that part of the print bed
mp_select_mini_v2.1494450593.txt.gz · Last modified: 2024/01/31 04:08 (external edit)