mp_select_mini_v2
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
mp_select_mini_v2 [2017/05/06 03:05] – donpdonp | mp_select_mini_v2 [2024/01/31 04:08] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | https:// | + | # links |
+ | * https:// | ||
+ | * manual https:// | ||
+ | * http:// | ||
+ | * https:// | ||
+ | |||
+ | # settings | ||
* print area 120x120x120mm | * print area 120x120x120mm | ||
Line 5: | Line 11: | ||
* filament 1.75mm | * filament 1.75mm | ||
+ | * print speed 50 mm/sec | ||
+ | * travel speed 150 mm/sec | ||
+ | |||
+ | # experience | ||
+ | * PLA temp 190. (less than 190 causes the extruder to slip/fail) | ||
+ | * bed >40C to stick | ||
+ | |||
+ | ## ABS | ||
+ | * Nozzle temp 220 | ||
+ | * Bed temp 65 | ||
+ | * Watch the outline lap closely. the shape of the plastic line says whether the height is correct in that part of the print bed |
mp_select_mini_v2.1494039953.txt.gz · Last modified: 2024/01/31 04:08 (external edit)