mp_select_mini_v2
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision | ||
| mp_select_mini_v2 [2017/05/10 21:09] – donpdonp | mp_select_mini_v2 [2017/05/27 01:43] – donpdonp | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | https:// | + | # links |
| + | * https:// | ||
| + | * manual https:// | ||
| + | * http:// | ||
| + | * https:// | ||
| # settings | # settings | ||
| Line 7: | Line 11: | ||
| * filament 1.75mm | * filament 1.75mm | ||
| - | * layer height 0.1mm | ||
| * print speed 50 mm/sec | * print speed 50 mm/sec | ||
| * travel speed 150 mm/sec | * travel speed 150 mm/sec | ||
| + | |||
| + | # experience | ||
| + | * PLA temp 190. (less than 190 causes the extruder to slip/fail) | ||
| + | * bed >40C to stick | ||
| ## ABS | ## ABS | ||
| * Nozzle temp 220 | * Nozzle temp 220 | ||
| * Bed temp 65 | * Bed temp 65 | ||
| - | * Watch the first layer closely. the shape of the line of plastic on the bed says whether the height is correct in that part of the print bed | + | * Watch the outline lap closely. the shape of the plastic |
mp_select_mini_v2.txt · Last modified: 2024/01/31 04:08 by 127.0.0.1