User Tools

Site Tools


minicopter

Differences

This shows you the differences between two versions of the page.


Previous revision
minicopter [2024/01/31 04:08] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +== Mini Quad Copter ==
  
 +inspiration
 +http://diydrones.com/profiles/blogs/arm7-mini-quad-with-xbee
 +
 +Frame
 +http://www.hobbyking.com/hobbyking/store/__22607__Turnigy_Integrated_PCB_Micro_Quad_KIT_.html
 +  Flying Weight: 145g (not including RX and battery)
 +  Width: 250mm
 +  Height: 85mm
 +
 +Motor
 +http://www.hobbyking.com/hobbyking/store/__5358__18_11_2000kv_Micro_Brushless_Outrunner_10g_.html
 +  Kv: 2000rpm/v
 +  Weight: 10g (With wires and mount)
 +  Suggested Prop: 7x5
 +  Suggested Power: 7.4v
 +  No Load Current: .4a
 +  Thrust: 130g / 5000rpm
 +  7.4v no-load speed: 15000rpm
 +  Peak Eff Current: 5.5A
 +  Shaft: 2mm
 +  Diameter: 18mm
 +  Length: 30mm (including mount & shaft)
 +
 +ESC
 +http://www.hobbyking.com/hobbyking/store/__4318__TURNIGY_Plush_6A_8bec_6g_Speed_Controller.html
 +  Continuous Current: 6A
 +  Burst: 8A
 +  BEC: Linear
 +  BEC Output: 5v/.8A
 +  Lipo Count: 2cell Guarenteed (3 cell capable but not warranted)
 +  NiMH: 5-6
 +  Programability: Programming card or Radio Controller
 +  Weight: 6g
 +  Size: 24x12x6mm
 +
 +Battery
 +http://www.hobbyking.com/hobbyking/store/__7308__Rhino_610mAh_3S_11_1v_20C_Lipoly_Pack.html
 +  Capacity : 610mAh
 +  Constant discharge: 20C
 +  Burst rate: 30C (15sec)
 +  Configuration : 3S 11.1v
 +  Pack size: 55x31x16mm
 +  Weight : 50.9g
 +
 +Propellers
 +http://www.hobbyking.com/hobbyking/store/__22754__5030_Propellers_Red_3xCW_and_3xCCW_6pcs_per_bag.html
 +  5" x 3"
 +  
 +Bucket Cave
 +  current bucket: 24.1cm
 +  the mini quadcopter frame is 25cm, without motors
 +  props are 12.7cm
 +  width with props is 38cm
 +  
 +MicroCopter
 +  CrazyFlie
 +  http://www.seeedstudio.com/depot/preorder-crazyflie-nano-quadcopter-kit-10dof-with-crazyradio-bccfk02a-p-1365.html?cPath=170_172