User Tools

Site Tools


minicopter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

minicopter [2012/09/04 15:03]
donpdonp
minicopter [2016/06/25 11:25]
Line 1: Line 1:
-== Mini Quad Copter == 
  
-inspiration 
-http://​diydrones.com/​profiles/​blogs/​arm7-mini-quad-with-xbee 
- 
-Frame 
-http://​www.hobbyking.com/​hobbyking/​store/​__22607__Turnigy_Integrated_PCB_Micro_Quad_KIT_.html 
-  Flying Weight: 145g (not including RX and battery) 
-  Width: 250mm 
-  Height: 85mm 
- 
-Motor 
-http://​www.hobbyking.com/​hobbyking/​store/​__5358__18_11_2000kv_Micro_Brushless_Outrunner_10g_.html 
-  Kv: 2000rpm/v 
-  Weight: 10g (With wires and mount) 
-  Suggested Prop: 7x5 
-  Suggested Power: 7.4v 
-  No Load Current: .4a 
-  Thrust: 130g / 5000rpm 
-  7.4v no-load speed: 15000rpm 
-  Peak Eff Current: 5.5A 
-  Shaft: 2mm 
-  Diameter: 18mm 
-  Length: 30mm (including mount & shaft) 
- 
-ESC 
-http://​www.hobbyking.com/​hobbyking/​store/​__4318__TURNIGY_Plush_6A_8bec_6g_Speed_Controller.html 
-  Continuous Current: 6A 
-  Burst: 8A 
-  BEC: Linear 
-  BEC Output: 5v/.8A 
-  Lipo Count: 2cell Guarenteed (3 cell capable but not warranted) 
-  NiMH: 5-6 
-  Programability:​ Programming card or Radio Controller 
-  Weight: 6g 
-  Size: 24x12x6mm 
- 
-Battery 
-http://​www.hobbyking.com/​hobbyking/​store/​__7308__Rhino_610mAh_3S_11_1v_20C_Lipoly_Pack.html 
-  Capacity : 610mAh 
-  Constant discharge: 20C 
-  Burst rate: 30C (15sec) 
-  Configuration : 3S 11.1v 
-  Pack size: 55x31x16mm 
-  Weight : 50.9g 
- 
-Propellers 
-http://​www.hobbyking.com/​hobbyking/​store/​__22754__5030_Propellers_Red_3xCW_and_3xCCW_6pcs_per_bag.html 
-  5" x 3" 
-  ​ 
-Bucket Cave 
-  current bucket: 24.1cm 
-  the mini quadcopter frame is 25cm, without motors 
-  props are 12.7cm 
-  width with props is 38cm 
-  ​ 
minicopter.txt ยท Last modified: 2016/06/25 11:25 (external edit)