User Tools

Site Tools


minicopter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Last revisionBoth sides next revision
minicopter [2012/08/20 19:07] – created donpdonpminicopter [2013/02/03 04:46] donpdonp
Line 6: Line 6:
 Frame Frame
 http://www.hobbyking.com/hobbyking/store/__22607__Turnigy_Integrated_PCB_Micro_Quad_KIT_.html http://www.hobbyking.com/hobbyking/store/__22607__Turnigy_Integrated_PCB_Micro_Quad_KIT_.html
 +  Flying Weight: 145g (not including RX and battery)
 +  Width: 250mm
 +  Height: 85mm
  
 Motor Motor
 http://www.hobbyking.com/hobbyking/store/__5358__18_11_2000kv_Micro_Brushless_Outrunner_10g_.html http://www.hobbyking.com/hobbyking/store/__5358__18_11_2000kv_Micro_Brushless_Outrunner_10g_.html
-Kv: 2000rpm/v +  Kv: 2000rpm/v 
-Weight: 10g (With wires and mount) +  Weight: 10g (With wires and mount) 
-Suggested Prop: 7x5 +  Suggested Prop: 7x5 
-Suggested Power: 7.4v +  Suggested Power: 7.4v 
-No Load Current: .4a +  No Load Current: .4a 
-Thrust: 130g / 5000rpm +  Thrust: 130g / 5000rpm 
-7.4v no-load speed: 15000rpm +  7.4v no-load speed: 15000rpm 
-Peak Eff Current: 5.5A +  Peak Eff Current: 5.5A 
-Shaft: 2mm +  Shaft: 2mm 
-Diameter: 18mm +  Diameter: 18mm 
-Length: 30mm (including mount & shaft)+  Length: 30mm (including mount & shaft)
  
 ESC ESC
 http://www.hobbyking.com/hobbyking/store/__4318__TURNIGY_Plush_6A_8bec_6g_Speed_Controller.html http://www.hobbyking.com/hobbyking/store/__4318__TURNIGY_Plush_6A_8bec_6g_Speed_Controller.html
-Continuous Current: 6A +  Continuous Current: 6A 
-Burst: 8A +  Burst: 8A 
-BEC: Linear +  BEC: Linear 
-BEC Output: 5v/.8A +  BEC Output: 5v/.8A 
-Lipo Count: 2cell Guarenteed (3 cell capable but not warranted) +  Lipo Count: 2cell Guarenteed (3 cell capable but not warranted) 
-NiMH: 5-6 +  NiMH: 5-6 
-Programability: Programming card or Radio Controller +  Programability: Programming card or Radio Controller 
-Weight: 6g +  Weight: 6g 
-Size: 24x12x6mm+  Size: 24x12x6mm
  
 Battery Battery
 http://www.hobbyking.com/hobbyking/store/__7308__Rhino_610mAh_3S_11_1v_20C_Lipoly_Pack.html http://www.hobbyking.com/hobbyking/store/__7308__Rhino_610mAh_3S_11_1v_20C_Lipoly_Pack.html
-Capacity : 610mAh +  Capacity : 610mAh 
-Constant discharge: 20C +  Constant discharge: 20C 
-Burst rate: 30C (15sec) +  Burst rate: 30C (15sec) 
-Configuration : 3S 11.1v +  Configuration : 3S 11.1v 
-Pack size: 55x31x16mm +  Pack size: 55x31x16mm 
-Weight : 50.9g+  Weight : 50.9g
  
 +Propellers
 +http://www.hobbyking.com/hobbyking/store/__22754__5030_Propellers_Red_3xCW_and_3xCCW_6pcs_per_bag.html
 +  5" x 3"
 +  
 +Bucket Cave
 +  current bucket: 24.1cm
 +  the mini quadcopter frame is 25cm, without motors
 +  props are 12.7cm
 +  width with props is 38cm
 +  
 +MicroCopter
 +  CrazyFlie
 +  http://www.seeedstudio.com/depot/preorder-crazyflie-nano-quadcopter-kit-10dof-with-crazyradio-bccfk02a-p-1365.html?cPath=170_172
minicopter.txt · Last modified: 2024/01/31 04:08 by 127.0.0.1