reprap-morgan

http://reprap.org/wiki/RepRap_Morgan

hardware

Hawthorne True Value

M8 Nut $0.38
M8 Washer $0.18
M8 threaded rod up to 100mm (too short)
brass tubing up to 380mm (too short)

Winks

M8 threaded rod 1m long $10
copper tubing 5/8“/15.875mm(actual) $7.99 4ft/1219mm
copper tubing 7/8”/22.225(actual) $12.99 4ft/1219mm

VXB Bearing

10 Bearing 608ZZ Shielded 8x22x7 Miniature Ball Bearings $7.37 ($5.74 shipping)

printable parts

print all the items from https://github.com/qharley/Morgan

filename		specs		Thanks to
01-pvcpipesupporta.stl \|\| \|\| \|\| \|\| 02-pvcpipesupportb.stl
03-zmountbottom12mm.stl \|\| \|\| \|\| \|\| 03-zmountbottom8mm.stl
04-zmounttop12mm.stl \|\| \|\| \|\| \|\| 04-zmounttop8mm.stl
05-motormountshort.stl \|\| \|\| \|\| \|\| 06-motormounttall.stl
07-drivewheelrod.stl \|\| \|\| \|\| \|\| 08-drivewheeltube.stl
09-22mm6805bearingadaptor.stl \|\| \|\| \|\| \|\| 10-bedarmleft12mm.stl
10-bedarmleft8mm.stl \|\| \|\| \|\| \|\| 11-bedarmright12mm.stl
11-bedarmright8mm.stl \|\| \|\| \|\| \|\| 12-bedzmountbracket12mm.stl \|\| \|\| \|\| \|\| 12-bedzmountbracket8mm.stl \|\| \|\| \|\| \|\| 13-bedrearmountclips.stl \|\| \|\| \|\| \|\| 14-bedfrontmountclips.stl \|\| \|\| \|\| \|\| 15-hallendstopholder12mm.stl
15-hallendstopholder8mm.stl \|\| \|\| \|\| \|\| 16-leadscrewshaftmotormount.stl
17-MorganarmPSIa.stl \|\| ABS \|\| sandwich \|\| \|\| 18-MorganarmPSIb.stl		ABS		sandwich
19-MorganarmThetaa.stl \|\| ABS \|\| sandwich \|\| \|\| 20-MorganarmThetab.stl		ABS		sandwich
21-Morgantoolhead.stl \|\| \|\| \|\| \|\| 22-Leadscrew-nutAlpen8mmSDS.stl
23-extruderbowdenadaptor.stl
24-MorganSpoolholder.stl
cap2.stl \|\| \|\| \|\| \|\| cloudfixstl.bash \|\| \|\| \|\| \|\| EckstruderBigGearHerringbone.stl
EckstruderBlockforPrusa.stl \|\| \|\| \|\| \|\| EckstruderIdlerBlockforPrusa.stl \|\| \|\| \|\| \|\| EckstruderSmallGearHerringbone.stl
thumbknobM4extruder.stl \|\| \|\| \|\| \|\| tighteningCone2.stl