## neotiny square Jan 2017
  * add gnd to go with each of the 4 data/programming lines
  * 2 mounting holes
  * move power to opposite side of neopx
  * center neopix and power connections between edges
  * align all pins to breadboard grid
  * add accelerometer?
  * add color sensor?

## GOOD FUSES

  avrdude: safemode: lfuse reads as E2
  avrdude: safemode: hfuse reads as DF
  avrdude: safemode: efuse reads as FF
  avrdude: safemode: Fuses OK (H:FF, E:DF, L:E2)

Write
  /home/donp/code/arm/arduino-1.6.9/hardware/tools/avr/bin/avrdude -C/home/donp/.arduino15/packages/ATTinyCore/hardware/avr/1.1.2/avrdude.conf -v -pattiny85 -carduino -P/dev/ttyACM0 -b19200 -U hfuse:w:0xDF:m